100Pcs 20x20x1mm Thermal Conductive Pads for Heatsink IC Chipset Northbridge GPU Heatsink
Not Available Discontinued - Unfortunately this product has been discontinued and we will not be receiving any more stock. Click here for alternative products.
Thermal Conductivity: 1.5w/m-K,Material: conductive silica gel, Package include:100pcs 20x20mmx1mm Thermal Pads. Note:It's sticky thermal pads, the surface of many products is smooth, vertical or inclined, you can choose our sticky thermal pads, it can stick together to ensure that it will not move or fall off. Because the back of the conductive thermal pads is sticky (we use high viscosity double-sided adhesive tape on the back), it will be a little difficult to take the white paper off. You just need to gently pick it out with your finger from the edge of the pads, to separate the white paper from the double-sided adhesive tape. It takes a little patience and I'm sure you can do it . These pads are for lower heat producing processors(raspberry pi,ps4 etc), memory chips and IC's. These pads are NOT meant to handle the high heat transfer a standard CPU or GPU needs.you can use this as a cooling pad for chipsets around the cpu. Use experience: the effect of using on CPU is not very good but the heat dissipation on North/South Bridge is good. Experiment: notebook bare plate power test, when it is not convenient to install heat sink, use the thermal conductive pads attach to the North/South Bridge and CPU, you can turn on for a few minutes. the above tests and suggestions are carried out in the environment of security test, please do not imitate.